Can I do vacuum excavation or suction excavation myself?

Posted on 31 October 2024
Estimated reading time: 6 minutes

An expert decision guide for contractors comparing self-hire with operated vacuum excavation

Technically, vacuum excavation equipment can be hired without a specialist operated-hire service in some circumstances, but that does not mean self-hire is the right choice for every project.

Vacuum excavation involves specialist equipment, buried utilities, site-specific hazards and potentially significant consequences if something goes wrong. The real question is therefore not simply “Can I hire the machine?” but:

Do I have the operator competence, site knowledge, equipment understanding, permits and risk controls needed to complete the excavation safely and effectively?

For many complex utility, infrastructure and construction projects, operated vacuum and suction excavation hire removes much of that uncertainty by providing the machine together with an experienced operator.

A quick self-hire checklist

Before considering self-drive vacuum excavation, ask yourself:

  • Do I have a suitably trained and competent vacuum excavator operator?
  • Do I understand the buried utilities and excavation risks on the site?
  • Do I know which vacuum excavator is appropriate for the job?
  • Do I have all necessary site passes and sector-specific requirements?
  • Can I respond safely if unexpected utilities or ground conditions are found?
  • Have I planned spoil handling, machine positioning and access?
  • Do I understand the potential consequences of a utility strike?

If several of those answers are no, operated hire is likely to be the more appropriate option.

Do you need specialist training to operate a vacuum excavator?

Vacuum excavators are specialist construction plant, so the operator needs appropriate training, competence and experience for the equipment and work being undertaken.

Holding a qualification is only part of the picture.

Experience matters particularly when excavating around electricity cables, gas mains, water pipes, telecommunications infrastructure or congested underground services.

Vac-Ex uses CPCS-qualified operators who complete additional in-house training and can also hold sector-specific credentials for environments including utilities, highways, airports, rail, power and other specialist sites.

The difference is not simply being able to operate the machine. It is knowing how to respond when the conditions underground are different from those expected.

What happens if you uncover an unexpected utility?

Unexpected or incorrectly recorded utilities are one of the strongest arguments for using an experienced vacuum excavation operator.

Plans and surveys are important, but actual site conditions can differ.

An experienced operator can work with the wider site team to reassess the excavation, alter the technique and expose infrastructure progressively rather than continuing with an approach that may no longer be suitable.

This is particularly important where several buried services occupy the same excavation area.

Vacuum excavation reduces reliance on mechanical digging immediately around those assets, but it still requires judgement and competent operation.

How serious is a utility strike?

A utility strike can create safety risks, delays, service disruption and costs that extend far beyond the immediate repair.

Potential consequences include:

  • Injury to workers or members of the public
  • Electricity, gas, water or telecommunications outages
  • Project delays
  • Additional labour and plant requirements
  • Repair and reinstatement costs
  • Traffic disruption
  • Wider business and social costs
  • Reputational damage

Research from the University of Birmingham examined 16 UK utility-strike cases and found that the wider indirect and social costs could greatly exceed the direct repair cost.

The subsequent peer-reviewed research reported an aggregated ratio of 29:1 for indirect and social costs compared with direct repair costs.

You can read more about the research here: University of Birmingham – Cost estimation of utility strikes

Do you know which vacuum excavator you need?

Choosing the correct machine depends on access, excavation depth, reach, ground conditions, spoil volume and the location of the excavation point.

A large truck-mounted unit might suit major infrastructure or utility works, while compact or tracked equipment may be more appropriate where access is restricted.

This is one area where self-hire can become difficult.

Knowing that you need a vacuum excavator is not necessarily the same as knowing which vacuum excavator you need.

Vac-Ex’s operated hire service starts with understanding the project requirements before recommending the machine and operator.

Do you have the right site passes and approvals?

Some projects require operators to hold additional qualifications, inductions or security passes before they can work on site.

This can apply in environments such as:

  • Airports
  • Rail infrastructure
  • Nuclear sites
  • Power and substations
  • Gas and water infrastructure
  • Petrochemical sites
  • MOD or other controlled locations

These requirements can take time to organise and should be identified before mobilisation.

Vac-Ex already supports projects in specialist environments and can allocate operators with the appropriate project-specific credentials where required.

Can you properly scope the excavation before the machine arrives?

Good vacuum excavation begins before the machine reaches the site.

The project should be assessed for:

  • Excavation objective
  • Known utilities
  • Ground conditions
  • Working depth and reach
  • Site access
  • Machine positioning
  • Spoil requirements
  • Operator credentials
  • Programme constraints

Poor specification can mean the wrong equipment arrives, access is unsuitable or the work takes longer than expected.

That is why specialist operated hire should include project discussion and equipment selection rather than simply machine availability.

Is self-hire actually cheaper?

Self-hire may appear cheaper on the day rate, but the total cost depends on training, labour, planning, site passes, additional equipment and the risk of delays or damage.

For a straightforward project with appropriately trained personnel, self-hire may be workable.

For complex buried-service work, however, operated hire can remove the need to source the operator separately and can reduce uncertainty around equipment selection, qualifications and mobilisation.

The fairest comparison is therefore not simply:

machine hire vs operated hire

but:

the total cost and risk of completing the excavation correctly.

When does operated vacuum excavation hire make most sense?

Operated hire is particularly valuable where buried services, specialist access, complex site conditions or sector-specific requirements increase the consequences of getting the excavation wrong.

It is especially worth considering for:

  • Live or congested utility environments
  • Airports and airside work
  • Rail projects
  • Power and substations
  • Gas and water infrastructure
  • Major civil engineering projects
  • Restricted-access sites
  • Emergency and reactive work

Vac-Ex provides nationwide vacuum and suction excavation with CPCS-qualified operators and specialist machines for different project conditions.

So, should you do vacuum excavation yourself?

If you already have a competent operator, the correct equipment, appropriate site approvals and a properly planned low-complexity excavation, self-hire may be possible.

But if the project involves buried utilities, specialist infrastructure, uncertain ground conditions or difficult access, the argument for operated hire becomes much stronger.

Vac-Ex operators have completed more than one million hours of strike-free excavation work, and the operated hire service is designed to provide the right machine, operator and project support together.

Sometimes the smartest decision is recognising that the machine is only part of the job.

Reference

Makana, L., Metje, N., Jefferson, I. & Rogers, C. (2016), What Do Utility Strikes Really Cost?, University of Birmingham